What Paint Correction Actually Is
Swirls, haze and light scratches live in the top layer of clear coat. Correction uses a machine polisher and abrasive polish to level that layer until it reflects light evenly again. It removes defects; it does not fill or hide them.
One-Step Correction
A single polishing stage with a pad and polish that cut and finish at once. It removes light swirls from washing, haze and dullness, and leaves a big jump in gloss. Our 1-Step Paint Correction starts at $795, includes clay bar decontamination and a paint sealant, and takes about 6–8 hours on site.
Two-Step Correction
A heavier compound removes deeper defects first, then a fine polish refines the finish to remove the haze the compound leaves. It is the right call for black and dark cars, years of automatic-wash swirls, and hard-water etching. Our 2-Step Paint Correction starts at $995 and includes hard-water spot removal.

How To Tell Which You Need
- Look at the paint in direct sun or under a flashlight. Fine circular swirls across every panel: 1-step.
- Swirls plus straight-line scratches you can see from a few feet away: 2-step.
- White spots that will not wash off: 2-step.
- Scratches that catch a fingernail: likely too deep for polishing alone.
Why We Test-Spot First
Every clear coat is different. We polish a small section first to find the least aggressive combination that works, so you keep as much clear coat as possible.
Make It Last
Correction restores the finish; protection keeps it. Pair it with a ceramic coating (our coating packages include the correction) or keep up with sealant washes.
What Correction Can And Cannot Fix
It can fix swirls, haze, light scratches, oxidation and water-spot etching in the clear coat. It cannot fix chips, scratches through to the primer, peeling clear coat, or dents. We tell you which is which during the inspection before any work starts.
Why Dark Cars Usually Need Two Steps
Black, dark blue and dark gray paint show every defect. A one-step makes a big improvement, but on dark paint the remaining 30% or so is still visible in the sun. Owners of dark cars who want a mirror finish nearly always choose two steps.
Why We Measure And Watch The Heat
Polishing generates heat, and clear coat is thin. We keep pads moving, manage panel temperature and choose the least aggressive combination that works. You keep more clear coat for the future.
Correction Plus Coating
Our ceramic coating packages build correction in: the 1-Step Ceramic Coating includes a one-step correction, and the 2-Step Ceramic Coating includes a two-step. If you are considering a coating, it usually makes sense to do both in one appointment rather than correct now and coat later.
How To Keep It Swirl-Free
Hand wash only, use clean microfiber, and avoid brush car washes. That is how you avoid paying for correction twice.



