Skip to content
◆ 100% Mobile — We Come To You Across LA County, Orange County & The Inland Empire (323) 717-7077 · Call To Book
(323) 717-7077
Services Pricing Reviews Service Areas About Blog FAQ (323) 717-7077
Paint Protection

How To Wash A Ceramic Coated Car

A coating makes washing easier, not optional. Here is the routine that protects your investment.

Quick Answer

Wait about a week after installation, then hand wash every 2–3 weeks with a pH-neutral shampoo, two buckets and a clean mitt, rinse well and dry with a soft microfiber or blower. Skip automatic brush washes and harsh degreasers.

The First Week

The coating keeps curing after we leave. Keep it dry for the first day and avoid washing for about a week. If something lands on it (bird droppings, sprinklers), gently rinse it off.

The Routine

  • Rinse first to remove loose dirt.
  • Two buckets: one with pH-neutral shampoo, one with clean water to rinse the mitt.
  • Wash top down with a clean microfiber mitt, wheels last with separate tools.
  • Rinse well; the water sheets off coated paint.
  • Dry with a plush microfiber or a blower.

What To Avoid

  • Automatic car washes with brushes
  • Dish soap, degreasers and high-pH cleaners on the paint
  • Drying with old bath towels or a dry chamois
  • Washing in direct midday sun when you can avoid it

Hard Water

Tap water across most of Southern California is hard, and minerals left to dry on a coating can spot it. Dry promptly, or let us handle it: our rigs rinse with deionized water that dries spot-free.

Signs It Needs Attention

If water stops beading or the paint feels grabby, it is usually just a layer of road film covering the coating. A decontamination wash brings it back. Our Executive Exterior is a good twice-a-year reset.

Let Us Do It

A maintenance plan (weekly, bi-weekly or monthly) keeps coated cars washed correctly without you lifting a mitt.

Wheels First, With Separate Tools

Brake dust is the dirtiest thing on the car. Clean wheels and tires first with dedicated brushes and a separate bucket, so that grit never touches the paint.

Drying Without Scratching

A coated car sheds most of the water on its own. Finish with a plush drying towel laid on the panel and pulled gently, or a blower. Avoid circular rubbing.

Topping Up

Every few months, a coating-safe spray sealant after a wash refreshes the slickness. It is optional, not required.

What Coatings Do Not Prevent

Coatings resist chemical etching and make cleaning easier, but they do not stop rock chips, key scratches or swirls from dirty brushes. Careful washing is still what keeps the finish flawless.

Decontamination Once Or Twice A Year

Even coated cars collect bonded iron and road film. An iron remover wash once or twice a year restores the coating's full water behavior.

Let Us Handle It

We know the coating because we installed it. A maintenance plan keeps it washed the right way and catches any issues early.

Questions?

Quick FAQ

Can I take a coated car through a touchless wash?
Occasionally, yes, but frequent harsh touchless chemicals wear coatings faster than hand washing.
Do I need special coating soap?
Any quality pH-neutral car shampoo works.
What voids a coating warranty?
Usually neglect and abrasive washing; ask us about the care terms when we install.

Ready For A Best In Class Detail?

We come to you across LA County, Orange County and the Inland Empire.

Schedule Online (323) 717-7077

100% Mobile Service — Serving Southern California

We come to you anywhere in these areas — and everywhere in between.

Schedule OnlineCall